Network settings
Here the local network settings are configured.
Type: Select either Dynamic IP to automatically acquire network setting from a
DHCP server within the network (i.e. router) or choose Static to set the
network parameters manually.
IP address: Enter the desired IP address for this device.
Subnet mask: Specify the subnet mask for the IP address.
Default gateway: Specify the IP address of the upstream router.
Primary/Secondary DNS: Specify the IP address of the DNS server.
Jumbo Frame: Here you can choose to enable or disable Jumbo frames.
Click ‘Apply’ for any of the changes to take effect.
Note: enabling Jumbo frames will only have effect when all other peripherals
within the network also support Jumbo frames.)
Comments to this Manuals