Please check www.sitecom.com for up to date drivers & utilities, manuals and support
• Maximum Session Number: enter or clear Maximum Session Number support. You can limit
the FTP session number by selecting the support and enter an integer to set the allowable
maximum session number. If you clear the support, it means that FTP server will have not any
limitation in session number. (default :5)
• Set Passive Mode: select or clear Set Passive Mode support that FTP server can accept
passive mode.
• Server Authentication: select or clear Enable Server Authentication support. If you select
the support, you need to enter user name and password to login to the Server. If you clear the
support, you do not need user name and password to enter the Server.
• Allow Anonymous Login: select the item, if you want to allow the user “anonymous” to login
to your FTP server with Read-Only permission and FTP server will not check the password. If
you clear the item, your FTP server will not support anonymous login function
• UPnP (Universal Plug and Play): select or clear Enable UPnP support. It is enabled in
Factory Default.
• Storage Access Mode : select Server mode (default) or NetUSB mode. And set some
parameters as below :
• Server Mode : In this mode, you can access the USB storage via FTP or SMB/CIFS protocols.
Only FAT16/32 file format is supported in this mode. This is the default mode.
• NetUSB Mode: In this mode, you can access the USB storage using NetUSB technology. In this
mode, FAT16/32 and NTFS file formats are supported, but only one user is allowed to access
the storage at the same time. Please refer to < 7. NetUSB mode > for the details.
9.4 Advanced Settings
9.4.1 User
• Administrator: enter your desired administrator username.(default : admin)
Comments to this Manuals