WL-613Wireless Broadband modem/router 54g(ADSL2+, 802.11B/G)User ManualVersion: 1.0
7 PC Network Adapter setup (Windows XP)• Enter [Start Menu] select [Control panel] select [Network].• Select [Local Area Connection]) icon=>sel
• Select [Internet Protocol (TCP/IP)] =>Click [Properties]. • Select the [General] tab.a. WL-613 supports [DHCP] function, please selec
8 Bringing up the WL-613Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. The WL-613 automatically ent
4. Type user name and password (default is admin/admin).4. Click OK.5. You will see the home page of the WL-613.The System status section allo
LAN settingsThe LAN tab gives you the opportunity to change the IP settings of the WL-613.Click <Apply> at the bottom of this screen to save any
Lease Time Forever. In the Lease Time setting you can specify the time period that the DHCP lends an IP address to your LAN clients. The DHCP will cha
Device StatusView the Broadband modem/router’s current configuration settings. Device Status displays the configuration settings
Internet StatusThis page displays whether the ADSL port is connected to an ADSL service provider. It also displays the router’s WAN
ADSL StatusThis page shows the current operation mode, status of your ADSL connection, the data rate and the quality of your ADSL link.Operation mode
DHCP Client StatusDHCP This page shows all DHCP clients (LAN PCs) currently connected to your network. The table shows the assigned IP address, MAC a
TABLE OF CONTENTS...11KEY FEATURES
WL-613 LogView the operation log of the WL-613. This page shows the current system log of the Broadband modem/router. It displays any event occurred a
10 Configuration WizardClick Wizard to configure the modem. The Setup wizard will now be displayed; check that the adsl line is connected and click N
Depending on the chosen provider, you may need to enter your user name and password or hostname in the following window. After you have entered the co
11 Wireless SettingsYou can set parameters that are used for the wireless stations to connect to this router. The parameters include Mode, ESSID, Cha
Basic SettingsBand Allows you to set the AP fixed at 802.11b or 802.11g mode. You can also select B+G+N mode to allow 802.11b, 802.11g and 802.11n cl
Advanced SettingsThis tab allows you to set the advanced wireless options. The options included are Authentication Type, Fragment Threshold,
Preamble Type The “Long Preamble” can provide better wireless LAN compatibility while the “Short Preamble” can provide better wireless LAN
SecurityThis Access Point provides complete wireless LAN security functions, included are WEP, IEEE 802.11x, IEEE 802.11x with WEP, WPA with pre-share
WEPWhen you select 64-bit or 128-bit WEP key, you have to enter WEP keys to encrypt data. You can generate the key by yourself and enter
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other sections by choosing Continue, or choose
IntroductionCongratulations on your purchase of the WL-613 Wireless Network Broadband modem/Router. The WL-613 is compliant with 802.11g
WPA-RadiusWi-Fi Protected Access (WPA) is an advanced security standard. You can use an external RADIUS server to authenticate wireless stations and p
ACLThis wireless router supports MAC Address Control, which prevents unauthorized clients from accessing your wireless network.Enable
WPSWi-Fi Protected Setup (WPS) is the simplest way to establish a connection between the wireless clients and the wireless router. You don’t have
WPS Current Status If the wireless security (encryption) function of this wireless router is properly set, you’ll see a ‘Confi
12 Firewall SettingsThe Broadband router provides extensive firewall protection by restricting connection parameters, thus limiting
DMZIf you have a client PC that cannot run an Internet application (e.g. Games) properly from behind the NAT firewall, then you can
The Broadband router's firewall can block common hacker attacks, including Denial of Service, Ping of Death, Port Scan and Sync Flood. If Interne
AccessYou can restrict users from accessing certain Internet applications/services (e.g. Internet websites, email, FTP etc.). Access Control
Filter client PC by MAC Check “Enable MAC Filtering” to enable MAC Filtering.Add PC Fill in “Client PC MAC Address” and
URL blockYou can block access to some Web sites from particular PCs by entering a full URL address or just keywords of the Web site.Enable URL Blockin
1 Key FeaturesFeatures AdvantagesIEEE 802.11g compliant Fully Interoperable with IEEE 802.11b / IEEE802.11g compliant devicesFour 10/100 Mbps Fast Swi
13 Advanced SettingsNetwork Address Translation (NAT) allows multiple users at your local site to access the Internet through a single Public IP Add
Virtual serverUse the Virtual Server function when you want different servers/clients in your LAN to handle different se
service (service/Internet application) port number from the Internet that will be re-directed to the above Private IP address host in your LANComment
Special applicationSome applications require multiple connections, such as Internet games, video Conferencing, Internet telephony and
Popular applications This section lists the more popular applications that require multiple connections. Select an application from th
UPNPWith UPnP, all PCs in you Intranet will discover this router automatically. So, you don’t have to configure your PC and it can easily access
QoSQoS can let you classify Internet application traffic by source/destination IP address and port number. You can assign priority for each type of ap
Edit a QoS rule Select the rule you want to edit and click “Edit”, then enter the detail form of the QoS rule. Click “Apply” after editing the form an
RoutingThese screens define routing related parameters, including static routes andRIP (Routing Information Protocol) parameters.Routing Table Flags I
Enable: RIP enabled on this interface. Silent: Listens for route broadcasts and updates its route table. It does not participate in sending route broa
2 Package ContentsOpen the package carefully, and make sure that none of the items listed below are missing. Do not discard t
SNMPUse the SNMP configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP).SNMP operation mode To select
are controlled by community strings. To communicate with the Router, the NMS must first submit a valid community string for authentication. Note: Up t
14 TOOLBOX SettingsPassword change optionsYou can change the password required to log into the broadband router's system
Time ZoneThe Time Zone allows your router to base its time on the settings configured here, which will affect functions such as Log entries and Firewa
Remote ManagementThe remote management function allows you to designate a host in the Internet the ability to configure t
Firmware UpgradeThis page allows you to upgrade the router’s firmware.Firmware Upgrade This tool allows you to upgrade the Broadband router’s system
Backup SettingsThe Backup screen allows you to save (Backup) the router’s current configuration settings. When you save the config
ResetYou can reset the router’s system should any problem exist. The reset function essentially re-boots your router’s system.
DDNSDDNS allows you to map the static domain name to a dynamic IP address. You must get an account, password and your static domain name from the DDNS
3 Product LayoutPort DescriptionADSL Connect your telephone/ADSL cable this portLANConnect the cable from your PC’s or network devices to this portPo
Front panelThe front panel describes the corresponding LED indications and port functionality.LED DescriptionPOWER Lights up when powered ON. Blinks o
4 Network + System RequirementsTo begin using the WL-613, make sure you meet the following as minimum requirements:• PC/Notebook
6 Setup LAN, WANLAN / computer connectionsModem connection
Comments to this Manuals